REPAIRS
Think you have a leaky pipe?
We've got you covered, with and Professional Service
Call for immediate, friendly and professional service today!
Contact Us to tackle you leaky pipe problem.
We employ a systematic and thorough approach using specialized tools to fix leaky pipes.
Here’s how we typically go about it:

Assessment and Leak Detection
The plumber begins by inspecting the visible pipes and joints to locate the exact source and extent of the leak. For hidden leaks (behind walls, ceilings, or floors), specialized tools or visual cues like wet spots or discoloration are used to pinpoint the problem.

Shutting Off the Water Supply
Before starting any repair, the plumber turns off the main water supply to prevent further water damage and drains the affected line by opening nearby faucets.

Preparing the Area
The area around the leak is dried and cleaned to ensure that repair materials will adhere properly. If the pipe is behind a wall or ceiling, the plumber may carefully remove the necessary section to access the damaged pipe.

Actual Pipe Repair
The plumber typically cuts out the damaged section of pipe using a pipe cutter or hacksaw. The ends of the remaining pipe are cleaned and prepared for the new section. Copper pipes: The plumber will solder (sweat) a new section into place, applying flux and heating the joint before adding solder for a watertight seal. Plastic pipes (PVC/CPVC): The plumber uses primer and solvent cement to join the new section, holding it in place until the bond sets. Slip couplings or push-fit connectors: These may be used for a variety of pipe materials to quickly and securely connect the new section without extensive work.

Testing the Repair
Once the repair is complete, the plumber slowly turns the water supply back on and checks for leaks by observing the repaired area under pressure.

Restoration and Cleanup
If any walls or ceilings were opened, the plumber may patch them or advise the homeowner on restoration. The work area is cleaned up, and the plumber ensures the system is functioning properly.
